This range is similar to the AGT range of Constant Voltage Transformers except that the output tolerance is 1% rather than 3%.
Most applications now use the AGT range with some exceptions in the rail industry etc where old products are swapped out with new replicas
ECVN Constant Voltage Transformers
ECVN Constant Voltage Transformers are ideal maintenance free solutions for loads that can suffer erratic operation or be damaged by electrical noise (common and series mode) local transients mains power sags surges and brownouts.
Constant Voltage Transformers are the best and most reliable Power Conditioners for applications ranging from process control and automation to remote sites and third world applications.
-
Features
- Constant Voltage Transformer (CVT)
- Galvanic isolation
- High common and normal mode noise attention
- Sags surge and brownout protection
- Sinewave output (generated by the CVT)
- Low installation heat output and running costs - maintenance free
- High Mean Time Between Failure (MTBF)
- Easy to install
-
Options
- All common voltages from 12-600Vac, higher voltages available in some designs
- Standard enclosures are IP20/21 enclosures are available up to IP66
- OEM style unenclosed versions
- Standard stabilisation limits are 1%, special designs can achieve 0.5%
- Units can be fitted with smoothed rectified outputs to give a constant DC voltage level
- 50 or 60Hz or both with adjusting taps.
- Three phase variants suitable for star loads
- NEW - Constant voltage with varying frequency
 |
|
AGT 1000J |
 |
|
AGT 15000J |
